Alto POSEIDON 5 Service Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 19
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
9
1)
Options / model variants
POSEIDON 5
5 Applications and methods
Ef cient high pressure cleaning is achieved by following a few
guidelines, combined with your own personal experience of speci c
cleaning tasks. Accessories and detergents, when correctly chosen,
can increase the ef ciency of your pressure washer. Here is some
basic information about cleaning.
5.1.1 Soaking
Encrusted or thick layers of dirt can be loosened or softened up by
a period of soaking. This is for example an ideal method within ag-
riculture – for example, within pig sties. The ideal soaking method
can be achieved via use of foam or simple alkaline detergent. Let
the product lie on the dirty surfaces for around 30 minutes before
pressure washing. The result will be a much quicker high pressure
cleaning process.
5.1 Techniques
5.1.2 Detergent and Foam
Foam or detergent should be applied onto dry surfaces so that the
chemical product is in direct contact with the dirt. Detergents are
applied from bottom to top, for example on a car bodywork, in order
to avoid “super clean” areas, where the detergent collects in higher
concentration and streams downwards. Let the detergent work for
several minutes before rinsing before rinsing but never let it dry on
the surface being cleaned.
5.1.3 Temperature Detergents are more effective at higher temperatures. Greases, oils
and fats can be broken down more easily at higher temperatures also.
Proteins can be cleaned at temperatures of around 60°C. Oils, traf c
lm around 70°C, and grease can be cleaned at 80°C - 90° C.
5.1.4 Mechanical Effect In order to break down tough layers of dirt, additional mechanical
effect may be required. Special lances and rotary or wash brushes
offer this supplementary effect that cuts through dirt.
5.1.5 High Water Flow or
High Pressure
High pressure is not always the best solution and high pressure may
damage surfaces. The cleaning effect also depends upon water
ow. Pressure levels of around 100 bar may be suf cient for vehicle
cleaning (in association with hot water). Higher ow levels give the
possibility to rinse and ush away large amounts of dirt easily.
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments