Alto POSEIDON 5 Service Manual download pdf (Page 6)

4

1)

Options / model variants

POSEIDON 5

2.2 Operating elements See fold-out page at front of these

operating instructions.

1 Handle

2 Hose reel

3 Mains power lead

4 Tank filler for detergent

5 Filling of pump oil and check

of oil level

6 Detergent tank

7 High pressure hose

connection

8 Supply water connection with

water inlet filter

2 Description

2.1 Purpose This high-pressure cleaner has

been designed for professional

use in:

– agriculture

– industry

– transport industry

– automotive cleaning

– municipal facilities

– cleaning trade

– construction industry

– food industry

etc.

Chapter 5 describes the use of

the high-pressure cleaner for

various cleaning jobs.

Always use the cleaner as de-

scribed in these operating in-

structions. Any other use may

damage the cleaner or the sur-

face to be cleaned or may result

in severe injury to persons.

9 Pressure gauge

10 Detergent metering knob

11 Main switch

12 Pressure regulation on spray

lance

13 Spray lance

14 Receptacle for Spray lance

15 Spray gun

16 Detergent intake hose

17 Receptacle for electrical lead

Nilfisk-Alto dealers in accord-

ance with the maintenace plan.

Failure to do so will invalidate

the warranty.

CAUTION!

High-pressure hoses, fittings

and couplings are important for

the safety of the cleaner. Use

only high-pressure parts ap-

proved by the manufacturer!

The mains power lead must not

differ from the version specified

by the manufacturer and may

only be changed by an electri-

cian.

Please contact the Nilfisk-Alto

service department or an au-

thorised specialist work-shop for

all other maintenance or repair

work!

Testing

The cleaner conforms to the

German „Guidelines for Liq-

uid Spray Jet Devices“. The

high-pressure cleaner must be

subjected to a safety examina-

tion in accordance with the „Ac-

cident Prevention Regulations

for Working with Liquid Spray

Jet Devices“ as required, but at

least every 12 months, by an au-

thorised inspector.

After all repairs or modifica-

tions to electrical equipment,

the protective conductor resist-

ance, the insulation resistance

and the leakage current must

be measured. Furthermore, a

visual inspection of the mains

power lead, a voltage and cur-

rent measurement and a func-

tion test must be carried out.

Our after-sales service techni-

cians are at your disposal as au-

thorised inspectors.

The complete „Accident Preven-

tion Regulations for Working

with Liquid Spray Jet Devices“

are available from the Carl Hey-

manns Verlag KG, Luxemburger

Strasse 449, 50939 Cologne or

from the appropriate associa-

tion of employers’ liability insur-

ances.

Unloader valve

Unacceptably high pressure is

fed back without residual pres-

sure via a bypass line into the

intake line of the pump when the

safety device is tripped.

The unloader valve is set and

sealed at the factory and must

not be adjusted.

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

Comments to this Manuals

No comments