Alto POSEIDON 5 Service Manual download pdf (Page 15)

13

1)

Options / model variants

POSEIDON 5

7.2 Maintenance work

7.2.1 Cleaning water inlet

filter

A water filter is fitted on the water

inlet to prevent large particles of

dirt from entering into the pump.

1. Unscrew the quick-release

connection if mounted.

2. Remove the filter and rinse it.

Replace damaged filter. Re-

place damaged filter.

7.2.2 Checking the pump oil

level

1. Check the oil level by lifting

off the cap. On level ground,

the oil should be just visible.

If necessary, add oil (see

chapter 9.4 for type of oil).

7.2.3 Changing the pump oil

1. Before changing the oil, al-

low the cleaner to become

warm.

2. Remove cap.

3. Loosen and remove drain

plug. Drain the oil into a suit-

able container(min. 1 litre)

and dispose the oil in compli-

ance with regulations.

4. Fit drain plug and refill with

oil according to chapter 9.4

Technical Data.

5. Oil should just be visible

in the oil container at level

ground.

6. Fit the cap.

CAUTION!

Special pump oil is required if

the cleaner is used near food.

Please consult your Nilfisk-Alto

dealer.

1 2 ... 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments