Alto MAXIDRIVE2.3+ User Manual download pdf (Page 27)

Note: in the event of an incorrect password, the display prompts again, encrypting all the characters again.

Protection is unlocked and the system enters default status.

To unlock the protection:

Access the submenu.LOCK

The display shows the prompt for entering the password to unlock the protection.

The four alphanumeric characters of the password are encrypted.

Note: Malongside the symbol of Total or Partial protection, the letter may also appear. This means that the system

is protected, but the PRESET in question has undergone one or more changes that have not yet been

stored. You can however switch the system on and off without any problems, as the current settings are

kept in the buffer memory. Nevertheless, if this is your work setup, it's advisable to store it in a PRESET.

Enter in the using the combination of the keys and the then presspassword and DIAL, ENTER.

UNLOCK

[****]

Passwo r d

UNLOCK

[B IRD]

Passwo r d

5.4.4 GANGING SUBMENU

Ganging Input Ganging

Output Ganging

This submenu allows to group together the treatment of similar inputs and/or outputs.

Similar is intended as meaning elements which have the same properties and/or the same structure.

For example, the right and left sections of a stereo system are similar, as they are made up symmetrically of the

same quantity and type of elements (the same components for High, Mid and Low frequencies).

Gang i ng

The practical use of the Ganging function consists in the possibility of editing with identical values the parameters

of similar elements, carrying out single (instead of double) operations.

For example, it's possible to set the same Delay value or equalization on both inputs with just one operation;

or set identical Xover parameters for the various outputs fed to a stereo sound system; or yet again, enable the

LIMITER simultaneously on the two outputs dedicated to two mono stage monitors.

The system automatically recognizes incompatible elements contained in the various configurations and only

enables the Ganging function where it can effectively be used. Therefore, the Ganging function doesn't have

any effect on the MONO setups. The Ganging function can be enabled separately for both groups of input and

groups of outputs.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 36 37

No comments

Alto MAXIDRIVE2.3+ User Manual Page 27