Alto MAXIDRIVE2.3+ User Manual download pdf (Page 13)

If you want to assign a new name to the PRESET you're storing:

- use the and keys to position the cursor on the required character

- use to enter the alphanumeric value wantedDIAL

- after finishing, press ENTER.

Pr es m n

OPERAT I ON

Naet

5.2.Delay Menu

Use this menu to work on the systems delay lines.

The practical differences between andDelay Input Delay Output

A Delay is only a processor by means of which a signal is deliberately delayed by a programmable length of time.

From a technical point of view, the Delays applied to the inputs and outputs are equivalent.

Nevertheless, their application is different:

In these pages, the number of the parameters and how they are presented varies according

to the configuration of the PRESET and according to and settings (Ganging Units UTILITY menu). In fact, these

pages only show the parameters that can actually be used, in the most suitable form of editing.

Parameters

Input Delay

delays the signal of an input (or the sum of the inputs) before sending it to the routing system.

In this way, all the outputs which depend on that input are delayed by the same length of time.

Also called input Delay is mainly used to compensate for the effectsMaster Delay, dues to

the distance between the various speaker enclosures or between various blocks of a complex

Input Delay

Output Delay

Parameters

DELAY

Parameters

INPUT DELAY

OUTPUT DELAY

DELAY

sound system (for example in large concert halls, stadiums, etc.), Thus achieving virtual alignment.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 36 37

No comments

Alto MAXIDRIVE2.3+ User Manual Page 13