Alto Compact 110 Instruction Manual download pdf (Page 4)

1.0 Preparation EN

IMPORTANT! Only use water without any im pu -

ri ties. If there is a risk of running sands in the inlet

water (i.e. from your own well), an additional ﬁ lter

should be mounted.

Safety precautions

 WARNING! High pressure jets

can be dan ger ous. Nev er direct

the water jet at per sons, pets, live

elec tri cal equip ment or the ma-

chine itself.

 The operator and anyone in the im me di ate vi-

cin i ty of the site of clean ing should take action to

pro tect them selves from being struck by debris

dis lodged dur ing op er a tion. Wear goggles during

op er a tion.

 Never try to clean clothes or foot wear on your self

or other persons.

 Do not let children or people who have not read

the instruction manual ope rate the ma chine.

 Never use the machine in an en vi ron ment where

there could be a danger of ex plo sion. If any doubt

arises, please contact the local authorities.

 It is not allowed to clean asbestos- containing

surfaces with high pressure.

 This high pressure washer must not be used at

temperatures below 0°C.

Safety devices

Locking device on spray handle

The spray handle features a locking device (5a).

When the pawl is activated, the spray handle can not

be operated.

Thermal sensor

A thermal sensor protects the motor against

overloading.The machine will restart after a few

minutes when the thermal sensor has cooled.

Before starting up your high pressure wash er, we

advise you to carefully read through this instruction

manual. Fol low all instructions to min i mize the risk

of injuries when using the ma chine.

Prior to operation

Before starting up your machine please check it

care ful ly for any de fects. If you ﬁ nd any, do not start

up your ma chine and con tact your ALTO distributor.

Especially check:

 The insulation of the electric cable should be

fault less and without any cracks. If the elec tric

cable is damaged, it should be replaced by an

authorized ALTO distributor.

Mains power connection

The following should be observed when connecting

the high pressure washer to the electric in stal la tion:

 Only connect the machine to an installation with

earth connection.

 The electric installation shall be made by a cer-

ti ﬁ ed electrician.

 It is strong ly rec om mend ed that the elec tric sup-

ply to this ma chine should in clude a re sid u al

cur rent device (GFCI).

Extension cable

Extension cables should be of a watertight con-

struc tion and comply with the below-men tioned

requirements for length and cable dimensions.

1,0 mm² max 12,5 m

1,5 mm² max 20 m

2,5 mm² max 30 m

 Cable connections should be kept dry and off the

ground.

 Always uncoil the extension cable com plete ly to

avoid heat dam age to the cable.

Water connection

Connect the high pressure washer by means of

the water hose to the water tap (pressure of inlet

wa ter, max. 10 bar - temperature of inlet water, max.

50°C). You may use an ordinary 1/2" garden hose

of min. 5 m and max. 25 m. Attach the hose using a

quick connector.

NOTE: Connection to the public mains according to

regulations.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Alto Compact 110 Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Vacuum cleaners Alto Compact 110