Alto LYNX-MIX244 USB User Manual download pdf (Page 5)

This is the fastest way to get something out from your LYNX-MIX244, if you have a

keyboard and a microphone.

a. Plug the microphone into Channel 1 MIC IN.

b. Turn down AUX and LEVEL controls on the input channel.

c. Put the EQ controls on center position.

d. Turn on your LYNX-MIX244 mixer.

f. If you like, you can adjust the EQ at this stage.

g. The LED on the Master LED meter should flash only occasionally, otherwise you

will hear distortion. If this LED is not active and you still hear distortion, please

turn down a little the input LEVEL control or reduce the output level of your

source instrument.

h. Connect your stereo keyboard into one of the s channel of yourtereo line inputs

LYNX-MIX244 mixer.

Here you are. It is your first gig with your LYNX-MIX244.

e. Sing or speak into the microphone with normal volume and adjust the channel

LEVEL control to half.

3. QUICK START

7. BLOCK DIAGRAM

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Alto LYNX-MIX244 USB User Manual Page 5