Alto MAC 2.4 User Manual download pdf (Page 7)

3-WAY MONO

To work in this mode, configure your system and connect cables as follow:

1. Press the switch to enter into the 3-way mono mode.MODE

2. Feed a mono signal from the Mixer to the input connector of CH1.

3. Output the Low frequencies signal via OUT LOW 1 to the power amplifier

dedicated to the woofers.

4. Output the Mid frequencies signal via OUT LOW 2 to the power amplifier

dedicated to the midrange.

5. Output the High frequencies signal via OUT HIGH 2 to the power amplifier

dedicated to the high frequency transducer.

6. Set LOW-HIGH Crossover Range of channel1 to x1 (switch disengaged) and

select the desired crossover frequency. This channel will crossover low and

mid frequencies.

7. Set LOW-HIGH Crossover Range of channel 2 to x10 (switch engaged) and

select the desired crossover frequency. This channel will crossover mid and

high frequencies.

8. Power up your X23 first, then the power amplifiers. After use, please ensure

the power amplifier is turned off first, then your X23.

3. CONTROL ELEMENTS

4. APPLICATIONS

HIGH

PHASE

HIGH

PHASE

MODE

BOOST

STEREO MONO

CHANNEL 2

CHANNEL 1

HIGH OUT 1 / (NOT USED)HIGH OUT 2 / (HIGH OUT) LOW OUT 2 / (MID OUT) INPUT 2 / (NOT USED) LOW OUT1 / (LOW OUT) INPUT 1 / (INPUT)

A101

2WAY- STEREO

(3WAY- MONO)

Rated Power Consumption 8.5W

FUSE:

210-240V: T100mAL 250VAC

95-120V: 200mA 250VAC

REPLACE FUSE WITH CORRECT

TYPE ONLY

DESIGNED INITALY

MADE INCHINA

PUSH

NEW TIDE

PUSH

NEW TIDE

POWER

OFF

MAC 2.4

StereoPowerAmplifier

LTO

CLIP

SIG

PROT

POWER

CH1 CH2

HIGH

MID

LOW

POWER

OFF

MAC 2.4

StereoPowerAmplifier

LTO

CLIP

SIG

PROT

POWER

CH1 CH2

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Alto MAC 2.4 User Manual Page 7

Comments to this Manuals

Related products and manuals for Audio amplifiers Alto MAC 2.4