Alto TS112A Specifications download pdf (Page 8)

SPECIFICATIONS

Output Power: 400 W Continuous RMS (335 W LF Class D + 65 W HF Class AB)

800 W Peak (670 W LF Class D + 130 W HF Class AB)

Crossover: 2 kHz

Max SPL @ 1m: 122 dB Continuous, 125 dB Peak

Frequency Response: 52 Hz – 18 kHz (@ -10 dB)

Input Level: Line 0 dBu

Low Frequency: 12" (305 mm) woofer, 2" (51 mm) voice coil

High Frequency: 1" (25 mm) neodymium driver

Horn Coverage: 80/100° H x 60° V nominal

Connectors: Input: 1/4" TRS or XLR

Link: XLR

Cabinet: Polypropylene, trapezoidal

External Control: Volume, power on/off with LED, clip limiter with LED, ground lift

Power supply: 100-120 V or 200-240 V, 50/60 Hz

Dimensions (H x W x D): 26" x 15.6" x 15.1" (660 mm x 396 mm x 384 mm)

Weight (speaker only): 42.8 lbs (19.4 kg)

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE

FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)

THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY

CAUSE UNDESIRED OPERATION.

Inrush current at initial switch-on: 6.02 A

Inrush current after power supply interruption: 4.16 A

www.altoprofessional.com

MANUAL VERSION 1.4

1 2 3 4 5 6 7 8

No comments

Alto TS112A Specifications Page 8