Alto X34 User Manual download pdf (Page 9)

5.Connect HIGH OUT 2 to the Mid-range frequency amplifier.

6.Connect HIGH OUT 1 to the High frequency amplifier.

no patch cord required.

HIGH AMP

MID AMP

LOW AMP

STEREO

MODE

Otherwise, if you want to present your X34 Active Crossover in a 4-way mono application, please connect

the unit to your system as the following illustration step by step:

1.Set Mode switch to mono Mode.

2.Plug the line-in into INPUT 1.

3.Connect LOW OUT 2 to the Sub frequency amplifier.

4.Connect MID OUT 2 to the Low frequency amplifier.

5.2 X34 4-Way Mono

5. APPLICATION

5.1 X34 3-Way Stereo

1. Set Mode switch into stereo Mode.

2. Plug the Left line-in into INPUT 1 and the Right line-in into INPUT 2.

3.Connect the LOW OUT 1 to the Left input of the Low frequency amplifier, and the LOW OUT 2 to the Right

input of the Low frequency amplifier.

4.Connect the MID OUT 1 to the Left input of the Mid frequency amplifier, and the MID OUT 2 to the Right

input of the Mid frequency amplifier.

5.Connect the HIGH OUT 1 to the Left input of the High frequency amplifier, and the HIGH OUT 2 to the Right

input of the High frequency amplifier.

If you want to present your X34 Active Crossover in a 3-way stereo application, please connect the unit

in your system as the following illustration step by step:

110-120V

220-240V

CHANNEL 2

HIGH

PHASE

MID

PHASE

3WAY-STEREO

(4WAY-MONO)

95-120V /210-240V 60-50Hz

AC INPUT

Rated Power Consumption 10W

FUSE:

210-240V: T100mAL 250VAC

95-120V: 200mA 250VAC

REPLACE FUSE WITH CORRECT

TYPE ONLY

STEREO MONO

HIGH

PHASE

MID

PHASE

BOOST

MODE

CHANNEL 1

HIGH OUT 2 / (MID OUT) MID OUT2/(LOWOUT) LOW OUT2/(SUBOUT) INPUT 2 / (NOT USED) HIGH OUT 1 / (HIGH OUT) MID OUT 1 (NOT USED) LOW OUT 1 / (NOT USED) INPUT 1 / (INPUT)

PUSH

NEW TIDE

PUSH

NEW TIDE

MIXER

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Alto X34 User Manual Page 9

Comments to this Manuals

Related products and manuals for Cars Alto X34