Alto 3.4 User Manual download pdf (Page 13)

To access the precedent page select page number and press Esc.

THR. 00 dB

PRESET 01 O1

4/4

ATK. 0.05 S

REL. 0.4 S

POL. DIR

THR. 00 dB

PRESET 01 O1

4/4

ATK. 0.05 S

REL. 0.4 S

POL. DIR

THR. 00 dB

REL. 0.4 S

PRESET 01 O1

4/4

ATK. 0.05 S

POL. DIR

THR. 00 dB

REL. 0.4 S

PRESET 01 O1

4/4

ATK. 0.05 S

POL. DIR

THR. 00 dB

REL. 0.4 S

PRESET 01 O1

4/4

ATK. 0.05 S

Vu-meter: This function allows the user to use the vu-meter to show the input signal level.

Mute keys:

LTO DRIVE3.4 has 6 mute keys.(each channel has one mute key).

Press the mute key, the related channel is muted.

5. APPLICATION ILLUSTRATION

2.Plug the left line-in into INPUT1 and the right line-in into INPUT2

1.Set the input /output path as the following :connection

5.1 LTODRIVE 3.4 2-Way Input, 6- Way Output (High, Mid, Low, High, Mid, Low)

If you want to present your LTODRIVE 3.4 in a 2-way input, 6-way output (high, mid, low, high, mid, low level)

application, please connect your system as the following illustration step by step:

ROUTING

PRESET 01

1/1

Use Up/Down/Left/Right keys to select one of the five fields: Page Number, Polarity, Limiter Threshold, Limiter

Release, Limiter Attack; the selected values can be changed by means of the dial.

When the current preset has been edited, it is necessary to save this preset by means of the STORE function,

otherwise whatever preset loading or power cycle of the system will overwrite and erase Completely the edited

data.

Up/Down/Right/Left key: These keys are used to navigate the menus and to modify the parameter values.

Enter/Esc key: These keys are used to access or to leave the menus, or to confirm the parameter values.

Edit key: This key allows the user to enter the edit menu (the related LED will light)

When entered the edit menu, the user will be able to access and modify all the parameters related to the process,

when the user modifies one parameter value, the LED starts to blink to signal the update. The LED will blink until

the storing of the new modified preset in one of the 64 available locations.

3.Set OUTPUT1, OUTPUT2, OUTPUT3, OUTPUT4, OUTPUT5,OUTPUT6 as high, mid, low, high, mid, low frequency

band OUT separately.

4.Connect the OUTPUT1,OUTPUT4 to the high frequency amplifier, OUTPUT2,OUTPUT5 to the mid frequency

amplifier, OUTPUT3,OUTPUT6 to the low frequency amplifier.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Alto 3.4 User Manual Page 13

Comments to this Manuals

Related products and manuals for Cars Alto 3.4