Alto APM80.1000 User Manual download pdf (Page 6)

This is the fastest way to get something out from your APM80.QUAD, if you have a

keyboard and a microphone.

a. Plug the microphone into Channel 1 MIC IN.

b. Turn down AUX and LEVEL controls on the input channel.

c. Turn down MONITOR and MAIN master controls.

d. Put the EQ controls on center position.

e. Connect 2 passive cabinets to the rear speakon jack or 2 active cabinets to the

front MAIN OUT connectors.

f. Turn on your APM80.QUAD.

g. Sing or speak into the microphone with normal volume and adjust the channel

LEVEL control of half.

h.Ifyoulike,youcanaddsomeequalizationatthisstage.

i. Turn up the MAIN LEVEL control until you reach the desired volume. The +10 LED

on the Master LED meter should flash only occasionally, otherwise you will hear the

distortion. If this LED is not active and you still hear distortion, please turn down a

little the input LEVEL control or reduce the output level of your source instrument.

j. Connect your stereo keyboard into channel 7/8 and repeat the sequence.

Here you are. It is your first gig with your APM80.QUAD.

3. QUICK START

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

No comments

Alto APM80.1000 User Manual Page 6